Powder Technology


-


Spray Dryer / Chiller 
 
Spray Drying is the most advanced instant drying and chilling process to engineer a particle and formulate in a single step. The ProCepT R&D Spray Dryer is a complete process tool that generates reliable, repeatable and scalable results in a minimum of time.
Unique features are:
  • Stainless steel head with supporting structure for the glass column
  • Integrated on a trolley, wall mounted or on a fixed table/floor stand
  • Easily accessible and visible glass process column and cyclone set-up
  • High process yields (>90%) from 1ml (10 mg) to 24 liters/8 hours
  • Particles from 1-150µm
  • PC control with real-time trending and excel date reporting
  • Water and organic solvents
  • Chilling or congealing; waxes, polymers, carbohydrates, …
  • Provision for product cooling for very temperature sensitive or low glass transition temperature products
  • Critical process data such as temperatures, pressures and liquid/gas speeds are handled by the control unit
  • Nitrogen recirculation system for oxygen sensitive materials, environmental requirements or drying of high quantities organic solvents
  • Unit can be used for pre-clinical and clinical applications
 
Typical applications:  Solid dispersion, Nano suspension, Matrix, Encapsulation, agglomeration, Taste masking, Pulmonary & nasal delivery
 
-


Fluidbed Drying Coating & Agglomeration 
 
Fluid Bed processing equipment is used for granulation, drying and coating of powders, pellets or spheres. Depending on vessel size, the typical batch range varies from 50g to 1kg of product.  The ProCepT Fluid Bed is the ideal equipment for formulation R&D, demonstration, or education purposes .
Features: 
  • Combination of plexi and glass for excellent process transparency
  • Integrated on a trolley, wall mounted or on a fixed table/floor stand
  • Easy connections for a fast change in set-up to air handling module and controls
  • Monitoring and control of all critical parameter
  • System in negative pressure for operator and product safety
  • Glass process vessels: 1 or 4 liters set-up
  • Easy (in process) filling, discharging and sampling in process
  • Water and organic solvents
  • Melt processing; waxes, polymers
  • Nitrogen recirculation for oxygen sensitive materials, environmental requirements or drying of high quantities organic solvents
  • Unit can be used for pre-clinical and clinical applications
-

High Shear Granulation
 
he ProCepT Granulator is used for wet or melt high shear granulation and pelletisation. Depending on vessel size, the typical batch range varies from 15g to 1kg of product.
The granulator is used to create wet agglomerates by high shear wet mixing of different powders. The atomized nozzle sprays the solvent with binder or active on the powder vortex, created by the impeller and chopper. The ProCepT Granulator is the ideal equipment for formulation R&D, demonstration or educational purposes . 

Unique features::
  • Combination of plexi and glass for excellent process transparency
  • Stainless steel vessels available
  • Integrated on a trolley, wall mounted or on a fixed table/floor stand
  • Monitoring and control of all critical parameters
  • Water and organic solvents
  • Easy clean-ability and strip-down of components in minutes
  • Different vessel sizes (for scale-up)
  • Atomization nozzle with different orifices
  • Quick changeover
  • Critical process data such as temperatures, pressures and speeds are handled by the control unit
  • Unit can be used for pre-clinical and clinical applications
-


Extruder / Spheroniser
 
The unit consists of a single screw extruder, combined with a spheroniser. Typical batch range varies from 100g to 1kg of product.
  • Lab scale extrusion (100-1000 g/hr) with integrated spheroniser
  • Full transparent plexi housing for good visibility
  • Integrated on a trolley, wall mounted or on a fixed table/floor stand
  • Segmented jacketed housing
  • Possibility for Melt processing
  • Jacketed spheroniser suitable for stand-alone use
  • Radial, elliptical or flat extrusion screens
  • Critical process data such as temperatures, pressures and speeds are handled by the control unit
  • Real time graphs and batch reporting capability
  • Unit can be used for pre-clinical and clinical applications
 
Unique features:
  • Combination of plexi and glass for excellent process transparency
  • Stainless steel vessels available
  • Integrated on a trolley, wall mounted or on a fixed table/floor stand
  • Monitoring and control of all critical parameters
  • Water and organic solvents
  • Easy clean-ability and strip-down of components in minutes
  • Different vessel sizes (for scale-up)
  • Atomization nozzle with different orifices
  • Quick changeover
  • Critical process data such as temperatures, pressures and speeds are handled by the control unit
  • Unit can be used for pre-clinical and clinical applications
-


Pan Coater
 
The ProCepT Pan Coater is used for small to medium scale sugar, film or enteric coating of tablets, capsules, pellets or spheres. Depending on drum size, the typical batch range varies from 50g to 6kg of product
In many cases one of the crucial steps in tablet development, is coating. The coating can have several functions. It can be used to strengthen the tablet, improve stability, control release, taste masking it, esthetic color, ... 



 
The Pan Coater features:
  • Full transparent plexi housing for good visibility
  • Integrated on a trolley, wall mounted or on a fixed table/floor stand
  • Stainless steel perforated drum: 350ml, 1/2/5/10 liters set-up
  • Monitoring and control of all critical parameters
  • Easy filling, discharging and sampling
  • Water and organic solvents
  • Nitrogen recirculation system for oxygen sensitive materials, environmental requirements or drying of high quantities organic solvents
  • DC motor with variable drive speed (3-40rpm)
  • Easy drum changes (no tools required)
  • Critical process data such as temperatures, pressures and speeds are handled by the control unit
  • Unit can be used for pre-clinical and clinical applications
 
-


Jet Mill JMRS -   Powder Milling
 
The ESCO-Labor Jet Mill grinds dry material powders in the range 
of 1 - 10 microns .  The jet mill technology is using blown air with specially designed jets to create a unique flow pattern causing product particles to collide with each other and hit against the wall of the grinding chamber with great impact to achive particle size reduction. The separation of the created fine particles from the air or inert gases, is carried out by a special filter.  The obtainable degree of fineness depends on the shape and position of the various available jets and the size of the grinding gap. 
 
Typical fields of application are the fine grinding of pharmaceutical active ingredients and chemicals. antibiotics, sulfonamides, salicylic acid, pesticides and mineral flours can be easily processed via the Jet Mill.  The processing method makes the machine particularly suitable for grinding under sterile conditions. 
 

Tetra Sense Scientific Tools Ltd.      Tel:+972 (0)4 6272720,      Fax:+972 (0)4 6272719,      Email: sales@tetrasense.co.il

Address: 19 Bareket St,  POB 3107, Industrial Park (North) Caesarea 3088900, Israel      Website: www.tetrasense.co.il




 
Livecity - Website Builder